EN 17
wet and dry vacuum cleaner VC 1200W
Cleaning the detergent tank
Info
In order to prevent contamination and blockage, empty
and clean the detergent tank(14) after every use.
ü The device is switched off.
1. Turn the end of the cleaning pipe(2) in counter-clockwise
direction (I.) and remove it from the rear holding
fixture(23) (II.).
2. Remove the detergent tank(14).
3. Empty the detergent tank(14).
4. Rinse the detergent tank(14) with water.
5. Reinsert the detergent tank(14) into the rear of the device.
6. Insert the end of the detergent pipe(2) into the rear
holding fixture(23) (I.) and tighten it in clockwise direction
(II.).
Rinsing the spray nozzles
Info
To prevent contamination and blockage, clean the
spray nozzles(9 and 19) after every use.
1. Remove the used spray nozzle as described in the
Changing the nozzles chapter.
2. Rinse the spray nozzle with water.
3. Attach a new spray nozzle as described in the Changing
the nozzles chapter.