To Next PageTo Next Page
Need help?Do you have a question about the Troy-Bilt 020676 and is the answer not in the manual?
General| Power Source | Gas |
|---|---|
| Engine Brand | Briggs & Stratton |
| PSI | 3000 |
| GPM | 2.3 |
| Pump Type | Axial Cam |
| Flow Rate | 2.3 GPM |
| Hose Length | 25 ft |
| Engine | Briggs & Stratton |
| Nozzles | Quick-Connect |
| Wheels | 10 in |
Details about the pressure washer's features and specifications.
Core safety principles and hazard awareness, including symbols and signal words.
Detailed warnings for chemical, electrical, fuel, mechanical, and kickback hazards.
Safety measures during operation, maintenance, repairs, and handling high pressure.
Instructions for unpacking the unit and verifying all parts are present.
Step-by-step guide for assembling the handle and accessory tray.
Procedure for checking and adding the correct engine oil.
Guidelines for selecting and adding the correct type of fuel.
Recommendations for using the pressure washer at higher altitudes.
Instructions for lubricating O-rings on connections for proper sealing and longevity.
Steps to connect the high pressure hose to the spray gun and pump.
How to connect the garden hose to the pressure washer inlet.
A review of assembly and preparation steps before starting the engine.
Labels and descriptions of key parts and controls on the pressure washer.
Proper placement and awareness of carbon monoxide hazards during operation.
Maintaining safe distances from combustibles and heat sources.
Step-by-step instructions for starting the pressure washer.
Precautions during operation and procedures for safely stopping the unit.
Guide for storing spray gun, extension, and tips in the accessory tray.
Instructions for selecting and changing spray tips for different cleaning tasks.
Advice on spray distance and technique for effective cleaning.
Steps for using the detergent tank and applying cleaners.
Procedure for rinsing surfaces after cleaning.
Explanation of the thermal relief system that protects the pump.
Recommended service intervals for daily, yearly, and other periods.
Essential checks to perform before each operation of the pressure washer.
Cleaning debris and checking the water inlet screen.
How to inspect the high pressure hose for damage and leaks.
Inspecting the detergent tube, tank, and check ball for proper function.
Procedures for checking the spray gun and cleaning clogged spray tips.
Procedures for maintaining O-rings and seals for proper function.
Guidance on oil selection, checking levels, and adding oil.
Step-by-step instructions for performing an engine oil change.
How to clean or replace the engine air cleaner for optimal performance.
Instructions for inspecting, cleaning, and replacing the spark plug.
Inspecting the muffler and spark arrester for damage or blockage.
Importance of keeping cooling fins clear of debris.
Information on the low-emission carburetor and professional adjustment.
Steps to protect the unit from freezing temperatures.
How to prepare the unit for storage exceeding 30 days.
Using fuel additives to keep fuel fresh during storage.
Using PumpSaver to prevent freeze damage and lubricate pump components.
Solutions for problems like low pressure, erratic pressure, or low volume.
Troubleshooting steps when detergent fails to mix with the spray.
Diagnosing and resolving problems with engine starting or running.
Details on warranty periods for different components and coverage.
Conditions and situations not covered by the warranty.
Key performance metrics like pressure, flow rate, and engine displacement.
List of recommended service parts and their corresponding part numbers.
