E
Elizabeth AndersonJul 30, 2025
How to troubleshoot pump pressure problems on Troy-Bilt 20207?
- PprogersJul 30, 2025
If your Troy-Bilt Pressure Washer pump fails to produce pressure, exhibits erratic pressure, chatters, loses pressure, or has low water volume, try these solutions: Ensure the nozzle is not in low pressure mode by pulling it backward for high pressure. Clear any blockage in the water inlet. Make sure there's an adequate water supply. Straighten any kinks or patch leaks in the inlet hose. Check and clean the inlet hose strainer. Ensure the water supply is not over 100°F. Clear any blockages or leaks in the high pressure hose. Replace the gun if it's leaking. Clean any obstructions in the nozzle. If the issue persists, it may be a faulty pump, and you should contact an authorized service facility.