Need help?Do you have a question about the Troy-Bilt ECONO-HORSE and is the answer not in the manual?
Avoid hands/feet near parts, use caution on surfaces, stop after hitting objects.
Identify and compare all parts received with the provided photos and lists.
Verify the transmission gear oil level is correct before operation.
Check and ensure the engine oil level is correct before operation.
Activate and charge the electric start battery system before use.
Connect the positive and negative battery cables to the correct posts.
Identify and understand the function of tiller controls like levers and pedals.
Operate the forward clutch paddles for forward motion of wheels and tines.
Use the maneuvering clutch for precise forward/reverse control.
Adjust the depth regulator to control tine penetration into soil.
Understand engine controls such as choke and throttle for starting and operation.
Follow procedures for starting engines on both recoil and electric start models.
Learn how to safely stop the tiller's engine and wheels.
Perform essential checks before starting the tiller, like oil and fuel.
Start tilling, including depth and engine speed adjustments.
Release controls to stop wheels/tines and use throttle/ignition to stop the engine.
Adjust drive belt for low and high speed ranges on Econo-Horse model.
Oil and grease lubrication points regularly for best performance and longevity.
Check and maintain transmission gear oil level every 30 hours.
Check engine oil level before each use and every five hours.
Change engine oil after initial hours and then every 10 hours.
Diagnose and resolve issues with the electric start system not turning over.
To Next Page
General