EasyManua.ls Logo

Troy-Bilt Pro-Line CRT

Troy-Bilt Pro-Line CRT
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
TROY-BILT LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
Printed In USA
OperatOrs Manual
Safe Operation Practices • Set-Up • Operation • Maintenance • Service • Troubleshooting • Warranty
WARNING
READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL
BEFORE ATTEMPTING TO OPERATE THIS MACHINE.
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
Bronco, Super Bronco & Pro-Line CRT Tillers
Form No. 769-07548
(December 13, 2011)

Other manuals for Troy-Bilt Pro-Line CRT

Question and Answer IconNeed help?

Do you have a question about the Troy-Bilt Pro-Line CRT and is the answer not in the manual?

Troy-Bilt Pro-Line CRT Specifications

General IconGeneral
BrandTroy-Bilt
ModelPro-Line CRT
CategoryLawn and Garden Equipment
LanguageEnglish

Summary

To The Owner

Record Product Information

Section to record model and serial number for support.

Customer Support

Contact information and resources for assistance with the tiller.

Important Safe Operation Practices

General Safety Precautions

Essential safety instructions regarding machine operation, fuel, and hazards.

Training and Preparation

Guidelines for operating the machine safely and preparing the work area.

Safe Gasoline Handling

Procedures for safely handling gasoline to prevent injury and fire.

Emissions and Spark Arrestor

Information on engine emissions and spark arrestor requirements for safe use.

Safety Symbols Explained

Descriptions of safety symbols found on the machine and in the manual.

Assembly & Set-Up

Unpacking and Contents

Instructions for unpacking the tiller and verifying carton contents.

Handle Assembly

Steps and diagrams for assembling the tiller's handle.

Tiller Crate Removal

Procedures for safely moving the tiller off its shipping crate.

Clutch Cable and Tire Setup

Instructions for connecting clutch cables and setting tire pressure.

Controls & Features

Tiller Control Overview

Explanation of key controls like clutch, depth regulator, and handlebar adjustment.

Wheel Drive and Engine Details

Information on wheel drive pins and references to engine controls.

Operation

Introduction and Break-In

Initial familiarization and recommended break-in maintenance for the tiller.

Starting and Stopping Engine

Step-by-step guide for safely starting and stopping the tiller's engine.

Engaging Drive and Tilling

How to engage forward and reverse drive for tilling operations.

Tilling Techniques and Clearing Tines

Guidance on tilling patterns, depth, and clearing debris from tines.

Slope Operation and Loading

Safe practices for tilling on slopes and loading/unloading the tiller.

Maintenance & Adjustments

Maintenance Schedule Overview

A schedule outlining routine checks and maintenance tasks.

Key Maintenance Checks

Procedures for checking engine oil, tire pressure, and hardware.

Lubrication and Gear Oil

Guidance on lubricating points and checking transmission gear oil.

Off-Season Storage

Instructions for preparing the tiller for extended storage periods.

Service

Belt and Tine Replacement

Procedures for replacing drive belts and servicing tines.

Transmission Gear Oil Service

Detailed steps for draining and refilling the transmission gear oil.

Troubleshooting

Common Problems and Solutions

A guide to diagnosing and resolving common issues with the tiller's operation.

Replacement Parts

Parts Identification and Ordering

List of components with part numbers for ordering replacements.

MANUFACTURERS LIMITED WARRANTY

Obtaining Warranty Service

Information on how to get warranty service and required proof of purchase.

State Law and Warranty Rights

Explanation of specific legal rights related to the limited warranty by state.

Related product manuals