G
gregoryhallJul 25, 2025
Why don't the tines engage on my Troy-Bilt Lawn and Garden Equipment?
- MMichele CruzJul 26, 2025
If the tines on your Troy-Bilt Lawn and Garden Equipment do not engage, here are a few things to check: * First, make sure there isn't a foreign object stuck in the tines and dislodge it if there is. * Second, check if the tine clevis pins are missing and replace them if needed. * Next, the control cable might not be adjusted properly, so adjust the control cable. * The belt might be worn or stretched, consider replacing it. If these steps don't resolve the issue, the pulley and idler may need adjustment, and you should take the tiller to an authorized service dealer.