SAFETY AND INTERNATmONAL SYMBOLS
This operator's manuai describes safety and internationai symbois and pbtographs that may appear on this product.
Read the operator's manuai for compbte safety, assembiy, operating and maintenance and repair information.
SYMBOL MEANING SYMBOL MEANING
A * SAFETY ALERT SYMBOL I
Indicates danger, warning, or
caution. May be used in conjunction
with other symbols or pictographs.
@
WARNING - READ OPERATOR'S
MANUAL
Read the Operator's Manuai(s) and
follow aHwarnings and safety
instructions. Faiiure to do so can
resuit in serious injury to the
operator and/or bystanders.
ON/OFF CONTROL
ON / START / RUN
ON/OFF CONTROL
OFF OR STOP
WEAR EYE, HEARING AND
HARDHAT PROTECTION
WARNINGs Thrown objects and
loud noise can cause severe eye
injury and hearing Ioss. Wear eye
protection meeting ANSi Z87_1-1989
standards and ear protection when
operating this unit. Wear a hard hal
Use a full face shieldwhen needed.
* GUIDE BAR WARNING:
Contact of the guide bar tip with any
object should be avoided. Tip
contact may cause the guide bar to
move suddenly upward and
backward, which may cause serious
injury.
UNLEADED FUEL
Always use clean, fresh unleaded fuei.
USE BOTH HANDS
Always use both hands while
operating the chain saw. Never use
only one hand to operate the saw.
Avoid bar nose contacL
OIL
Refer to operator's manuai for the
proper type of oil
To Next Page
Loading...
Need help?
General
