EasyManua.ls Logo

Troy-Bilt TB4620C User Manual

Troy-Bilt TB4620C
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
769-25598 / 00 06/20
Operator’s Manual
2-Cycle Chain Saw
TB4620C
TABLE OF CONTENTS
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Know Your Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Oil and Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Starting and Stopping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Cleaning and Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
SAVE THESE INSTRUCTIONS
IMPORTANT: Read this manual thoroughly before using this product. Follow all instructions.
All information, illustrations, and specifications in this manual are based
on the latest product information available at the time of printing. We
reserve the right to make changes at any time without notice.
The product may vary slightly from the illustrations contained in this
manual.
Copyright© 2020 MTD SOUTHWEST INC, All Rights Reserved.
SERVICE
DO NOT RETURN THIS UNIT TO THE RETAILER. PROOF OF
PURCHASE WILL BE REQUIRED FOR WARRANTY SERVICE.
For assistance regarding the assembly, operation or maintenance of
the unit, please call 1-800-828-5500 (in the United States) or 1-800-
668-1238 (in Canada). Additional information can be found at
www.troybilt.com (in the United States) or www.troybilt.ca (in
Canada).
Warranty service is available through an authorized service center.
To locate a service center in your area, please visit our website or
call the number listed above. Service on this unit, both within and
after the warranty period, should only be performed by an
authorized and approved service center. When servicing, use only
identical replacement parts.
Register your product at www.troybilt.com (US) or
www.troybilt.ca (Canada) to have parts, owner manuals, and
warranty information at your fingertips.
Question and Answer IconNeed help?

Do you have a question about the Troy-Bilt TB4620C and is the answer not in the manual?

Troy-Bilt TB4620C Specifications

General IconGeneral
Engine Type2-Cycle
Engine Displacement46 cc
Power SourceGas
TypeGas Chainsaw
Bar Length20 in
Chain Pitch0.325 inches
Weight13 lbs
Fuel Capacity16.9 oz
Chain Gauge0.05 in.
Fuel Tank Capacity16.9 oz

Summary

Safety Guidelines

Important Safety Instructions

Key safety rules and precautions to follow before operating the unit.

Safety Warnings for Gas Units

Specific safety advice related to handling gasoline and operating gas-powered units.

Kickback Safety

Understanding Kickback

Explains the causes and types of kickback and its potential dangers.

Additional Safety Precautions

Kickback Safety Precautions

Steps to reduce the chance of accidents or injury from kickback.

Safety and International Symbols

Specifications

Oil and Fuel Mixing

Fueling the Unit Safely

Precautions and steps for safely adding fuel to the chainsaw.

Starting and Stopping

Starting Instructions

Step-by-step guide for starting the chainsaw engine.

Emergency Stopping

Method for immediate shutdown in emergency situations.

Operation Guidelines

Holding the Unit

Cutting Procedure Basics

Felling Safety

Felling Procedure

Making the Notched Undercut

How to make the directional cut for felling a tree.

Making the Felling Back Cut

Instructions for the back cut to bring the tree down.

Bucking Safety

Bucking Procedure

Maintenance

Adding Bar and Chain Oil

Adjusting Chain Tension

Guide Bar and Saw Chain Management

Sharpening the Saw Chain

Replacing Guide Bar and Saw Chain

Adjusting Idle Speed

Maintaining the Spark Plug

Cleaning and Storage

Troubleshooting

Related product manuals