To Next PageTo Next Page
Need help?Do you have a question about the Troy-Bilt TB525ET and is the answer not in the manual?
General safety rules and warnings for operator and bystanders.
Explains symbols indicating danger, warning, caution, and notes for safe operation.
Precautions for handling flammable gasoline to prevent fire and explosion.
Rules for safe operation, including personal protection and unit handling.
Additional guidelines for safe operation and clutch engagement.
Procedures for cleaning, storing, and maintaining the unit.
Reminder to keep the manual for future reference.
Explains symbols and pictographs used in the manual and on the product.
Warning about injury from propelled objects and the rotating cutter.
Explains choke control, on/off switch, and sharp blade safety.
Step-by-step guide for assembling the trimmer unit.
Instructions for attaching and adjusting the J-handle for optimal grip.
Procedure for attaching the safety cutting shield to the unit.
Guidance on using the correct oil and fuel for the 4-cycle engine.
Safe procedures for adding fuel to the tank, including precautions.
Step-by-step guide to start the 4-cycle engine safely.
Instructions for properly shutting down the engine.
Information on using the EZ-Link system for attachments.
Procedures for attaching and detaching cutting attachments or add-ons.
Proper stance, grip, and body positioning for trimmer operation.
How to extend the trimmer line using the bump head mechanism.
Techniques and advice for efficient and effective grass trimming.
Method for performing decorative trimming around objects.
How to use the edger add-on and adjust cutting depth.
Instructions for installing and using the storage hanger.
Table outlining required maintenance tasks and frequencies.
Step-by-step guide for installing new trimmer line.
Instructions on how to wind the trimmer line onto the inner reel.
Guide for installing a pre-wound line spool.
Procedures for cleaning the trimmer head assembly.
Safety and procedure for replacing the edger blade.
Steps for removing and installing a new spark plug.
Instructions on how to check the engine oil level accurately.
Procedure for draining and refilling the engine oil.
Steps for cleaning and re-oiling the air filter.
Information on adjusting the carburetor and idle speed screw.
Procedure for checking and adjusting valve clearance.
Steps for cleaning or replacing the spark arrestor screen.
General cleaning procedures and long-term storage instructions.
Guidelines for safely transporting the unit.
Common causes and solutions for the engine not starting.
Troubleshooting for problems with engine idling and acceleration.
Solutions for issues with line advancement and uncontrolled line.
Explains the warranty coverage for emission control systems.
Outlines the owner's duties for maintaining warranty coverage.
Lists components covered under the emission warranty.
Details warranty coverage for evaporative emission control systems.
Specifies owner's responsibilities for maintaining warranty coverage.
Requirements and interpretations for warranty claims on defective parts.
Instructions on how to get warranty service and locate dealers.
Cases and conditions not covered by the limited warranty.
Information on how state law relates to the warranty and implied warranties.
General
