32
APPROVAL
All the components fitted in this vehicle comply with legal approval require-
ments, including the identification marks on parts that require them.
In particular, note that the following items are compulsory for using the motor-
cycle on public roads and must be present on the vehicle in order to pass the
Vehicle Technical Inspection Test:
- Registration plate holder
- Speedometer
- Lighting system and reflectors
- Indicators
- Horn
- Rear view mirrors
- Steering lock
- Manufacturer’s identification plate
- Air filter restrictor
- Exhaust system with catalyser
- Exhaust muffler
- Carburettor jets
- Side stand
IMPORTANT NOTE: The vehicle is also supplied with a RACING KIT contai-
ning additional components. Bear in mind that the modifications provided
by this kit are NOT covered by the vehicle approval.
41 - Approval
To Next Page
Loading...
