To Next PageTo Next Page
Need help?Do you have a question about the Tru-Jump STR-12FT-6P and is the answer not in the manual?
Highlights severe risks like paralysis or death from improper use, emphasizing immediate dangers.
Provides essential rules for safe trampoline operation, including supervision and weight limits.
Offers contact information for customer service, sales, and assembly assistance.
Visual warnings against specific actions like somersaults and using multiple users simultaneously.
Outlines mandatory checks for trampoline components like legs, netting, and springs before use.
Explains the trampoline's function and the critical need for knowledgeable adult supervision.
Details requirements for trampoline location, stability, and protection against wind effects.
Stresses the importance of using authorized TruJump replacement parts for safety and warranty.
Reiterates critical 'DANGER' and 'WARNING' statements to ensure user awareness before proceeding.
Guides users on verifying parts, ensuring adequate space, and preparing the assembly site.
Lists conditions that must be met before the trampoline can be used safely.
Details prohibited activities, health conditions, and the absolute need for single-user operation.
Emphasizes the severe consequences of not adhering to all safety instructions provided.
Specifies the need for a flat, level surface, ample clearance, and avoidance of hard ground.
Addresses risks from wind, recommending anchoring and storage during severe weather.
Defines responsibilities for supervision, age restrictions, and acceptable user behavior.
Advises on jumping in the center, controlling bounce height, and using protective padding.
Provides step-by-step instructions for safely entering and exiting the trampoline.
Explains the role of the frame pad in protecting users from springs and the frame.
Outlines how to use the enclosure safely, including entry, exit, and avoiding misuse.
Details the care required for enclosure netting, mat, and padding, including inspection frequency.
Provides specific time intervals for thorough inspection of the enclosure netting and its components.
Describes how to pinch and pull netting to check for wear, tears, or deterioration.
Instructs on visually inspecting the frame pad for any signs of wear or damage.
Advises on the yearly replacement of enclosure netting and pads for optimal safety.
Lists and illustrates the individual parts of the trampoline frame, mat, and springs.
Lists and illustrates the parts specific to the trampoline enclosure system.
Details the various screws, washers, caps, and tools required for assembling the trampoline.
Warns about safety risks during assembly and specifies the need for multiple people and protective gear.
Emphasizes checking for all required parts before commencing the assembly process.
Provides notices regarding the use of authorized parts and avoiding power tools during assembly.
Lists the specific steel tubing parts (Top Rails, Leg Bases, Extensions) needed for frame assembly.
Stresses the necessity of a completely flat and level site for stable frame assembly.
Details the process of attaching vertical leg extensions to the leg bases to form leg supports.
Explains how to connect top rails to the assembled leg supports, noting hole orientation.
Guides the insertion of top rails between the top rails with leg sockets to form the main frame.
Details how to use screws, washers, and tools to securely fasten leg supports to the top rails.
Advises on aligning holes and the importance of the larger indented hole's orientation.
Describes the procedure for hooking springs between the mat's triangle-rings and the frame.
Instructs on distributing springs evenly by attaching them on opposite sides of the mat.
Continues the process of attaching springs, emphasizing opposite side placement for tension balance.
Details the attachment of additional springs at specified numbered points for complete mat coverage.
Finalizes the attachment of all springs, ensuring even tension distribution across the mat.
Instructs to revisit frame assembly steps to fully tighten all screws after spring installation.
Explains how to lay the frame pad over the trampoline to cover all springs and the frame.
Guides users to align the pad's warning label with the designated enclosure entrance.
Details attaching end caps and assembling frame tubes using bolts, washers, and fasteners.
Provides crucial warnings about hand placement and protective gear during pole assembly.
Describes securing tube caps to the upper frame tubes using screws and an Allen wrench.
Explains how to attach the enclosure netting buckles to the upper frame tube caps.
Details how to connect the upper frame tubes to the lower frame tubes with screws.
Ensures the enclosure entrance is correctly positioned relative to the mat and pad warnings.
Guides on using cords to tie the enclosure netting securely to the trampoline mat's triangle-rings.
Details wrapping and tying the inner elastic straps of the frame pad around the mat's triangle-rings.
Explains how to wrap outer elastic straps behind leg sockets and tie them securely.
Reinforces checks for tight knots, pad security, and user understanding of all warnings.
Instructs on closing the enclosure zipper and securing it with buckles for safety.
Details the process of attaching the safety instruction placard to the trampoline frame.
Reminds users to go back and fully tighten all nuts and bolts after assembly is complete.
Provides instructions for disassembling the trampoline, emphasizing retaining parts and packaging.
Outlines methods for moving the trampoline, recommending disassembly or secure joint taping.
Lists essential checks for springs, legs, netting, and padding for wear or damage.
Advises on storing the trampoline during adverse weather and securing it against unauthorized access.
Enumerates potential hazards such as missing parts, tears, or protrusions that require attention.
Defines the warranty period for the frame and product, and requirements for the original purchaser.
Lists conditions, misuse, and unauthorized modifications that will void the product warranty.
Outlines the structured lessons for learning fundamental trampoline skills and safety.
Details the progression from basic bounces to more complex maneuvers and routines.
Describes the 'BOUNCE' game designed to encourage routine development and control.
Provides step-by-step guidance on performing the fundamental standing bounce correctly.
Details the technique for landing on knees and returning to a standing position safely.
Explains how to safely perform a seat bounce and return to an upright position.
Guides the user through the steps for performing a 180-degree turn bounce.
General| Brand | Tru-Jump |
|---|---|
| Model | STR-12FT-6P |
| Category | Sports & Outdoors |
| Language | English |
