Truck Hero extang XCEED User Manual

3 1 8 5 1 0 1 0 - 3 0
The XCEED truck bed cover requires the
installation of rails and some small parts.
Note any damaged or missing
components before installing.
It is important that
all areas where the
bed cover mounts
are clean and free
of debris prior to
installing.
Item No. 31851010-30 4.16.19 DD
Extang, Corp., 2019. Printed in USA
If the truck
does not have
a bed liner, install the
cab/bulkhead seal.
Wipe the painted
surfaces with
isopropyl alcohol
before applying.
With the tailgate closed, place the Xceed
rails on the truck bed rail with the slotted
bracket forward toward the
cab/front and facing inside.
Front/Cab
Make sure the rail is clamped square with the truck bed rail
and bulkhead. Start at the front/cab and place the rst clamp
6 to 9 inches (152 to 229mm) from the front.
NOTE: Some drop in
liners may require
trimming in the corners
to t the rail tightly into
the corner of the bed.
Make sure the
clamp is inserted
all the way up
into the rail and
clamp teeth are
aligned to the rail
slots to ensure grip.
Tools required:
9/16” and 1/2” sockets and ratchet wrench,
Phillips screwdriver

Truck Hero extang XCEED Specifications

General

Brand	Truck Hero
Model	extang XCEED
Category	Automobile Accessories
Language	English

Summary

XCEED Truck Bed Cover Installation

Tools and Surface Preparation

Lists necessary tools and emphasizes cleaning truck bed surfaces before installation begins.

Side Rail Mounting and Clamping

Guides on positioning and securely clamping the side rails to the truck bed rails and bulkhead.

Header Panel and Cover Attachment

Instructions for attaching the header panel and mounting hardware for the main cover.

Final Alignment and Latch Engagement

Checks for proper tailgate alignment, cover positioning, and latch contact with rails.

Drainage System and Bumpers

Details on installing drain hoses and cab bumpers for protection and water management.

Safe Operation of Extang XCEED Cover

Approved Driving Positions

Specifies allowed cover positions (closed, folded/secured) for safe vehicle operation.

Tail Panel and Rotary Handle Use

Explains how to operate the tailgate panel using the rotary handle and its latches.

Key Operating Precautions

Important tips on clearing snow, ice, avoiding towing, and not placing objects on the cover.

Extang XCEED Parts and Warranty Information

Replacement Parts Identification Guide

An illustrated guide identifying all components available as replacement parts for the XCEED cover.

Limited Warranty Conditions and Exclusions

Details the terms, conditions, exclusions, and factors that will void the Extang limited warranty.

Warranty Claims and Parts Ordering Process

Information on how to submit a warranty claim and order necessary replacement parts.