TRUCKRUN CB03 - Normal Operation

Wuxi Truckrun Motor Co.,Ltd
Wuxi Truckrun Motor CO.,Ltd reserves the right of final interpretation
2.5 Normal operation
1） Power ON/OFF
Under power off state, The display starts working after a long time press mode key.
Long time press mode key to turn off the battery power supply. (Under power off state,
the leakage current of display is less than 1ua).
By default within 5 mins no operation, and no speed output, the display will be off
automatically.
2
） ◆
Turn on / off lamp
Press “UP key”2S, Inform controller turns on lamp, display shows lamp symbol,
meanwhile the backlight gets darker. Press’UP key’2S, Inform controller turns off lamp,
and recover backlight brightness..
3） Walking assist
In static state of the vehicle, press more than 2S the "DOWN key" at any gear ,the
vehicle enters the electric power walking assist, and screen displays walking symbol.
The actual wheel speed is not detected, the speed shows 2.5KM/H (1.5MPH in miles).
The actual speed is detected, it shows real time speed, the maximum speed is 6KM/H.
Release "DOWN" button the electric vehicle will immediately stop output and return to
pre-walking state.