True & Tidy STM-300 User Manual

Page 8 of 9
 Once the appliance has been disconnected from the power
outlet, allow 30 minutes for the appliance to cool down.
 Empty the remaining water in the tank and clean the external
surface with a dry cloth.
 Wrap the cord safely around the steam mop cord wrap and store
in a dry, cool, flat surface.
 Remove and wash mop pad for next use.
PROBLEM
POSSIBLE REASON
POSSIBLE
SOLUTION
Reduced steam or
no steam
Water tank may be
empty
Fill water into the
water tank
Steam
mop head
may be blocked
Clean steam
mop
head
Unit will not turn on
Blown fuse or
breaker
Replace fuse or
reset breaker in
home
There is no power to
the unit
Make sure unit is
plugged in
Internal fuse is
blown
Contact with
customer service
STORAGE
TROUBLESHOOTING GUIDE

True & Tidy STM-300 Specifications

General

Brand	True & Tidy
Model	STM-300
Category	Steam Cleaner
Language	English