Page 7 of 9
CLEANING AND MAINTENANCE
IMPORTANT
：
Allow the steamer to fully cool down before
performing any maintenance or troubleshooting checks.
Maintenance
•
Ensure that the steam mop is off before cleaning.
•
Empty the water tank after use.
•
Do not immerse the appliance in water.
•
Store steam mop in a cool, dry place.
•
If steam becomes intermittent throughout use, steam mop
may need descaling.
Descaling Instructions
1. Prepare a solution of 1/3 white vinegar and 2/3 tap water and add
to the water tank.
2. Plug in the cord and turn on the steam mop. Run the
vinegar/water solution until it runs out.
3. Repeat the above procedure as needed until a normal steam flow
rate is achieved.
4. Fill the water tank with distilled water to clean.
5. Run the distilled water until it runs out.
WARNING
Do not leave the appliance unattended during the descaling
process and/or while in use.
CLEANING MICROFIBER PAD
Machine washable on "warm" setting.
Always use a mild detergent.
For best care results, lay flat to dry.
Never use bleach or fabric softener when washing the microfiber
cleaning pad.
CARE INSTRUCTIONS
To Next Page
Loading...
