True 42 - Interior Components and Access; Shelving and Door Bins

24
TRUE RESIDENTIAL
™
REFRIGERATOR STORAGE
DOOR BINS
The door bins are located in the bottom drawer of the refrigerator. (See Figure 17). To install, push tabs into the
slots in the door and slide downward unit it stops. (See Figure 18). To remove or adjust a door bin, lift up and
away from door back.
NOTE: BE CAUTIOUS OF PLACING TALL ITEMS IN TOP DOOR BIN, AS ITEMS MIGHT INTERFERE
WITH UI CONTROL PANEL.
FIGURE 14
FIGURE 15 FIGURE 16
GLASS SHELVES
Remove the top foam piece holding the glass shelves. Carefully remove shelves and set aside. (See Figure 15).
Remove all other packing material. To install, insert glass shelf into the shelf standards on the back wall, with
the front tilted upward, and then lower the front until it stops. (See Figure 16). To remove or adjust a glass
shelf, tilt up, and then lift up and out.
All shelving and door bins come
packaged inside the unit.
(See Figure 14)
Final Glass Shelf Installation
FIGURE 17 FIGURE 18 Final Door Bin Installation
SHELVING