CHAPTER 2: ASSEMBLY INSTRUCTIONS
Truefitness.com / 800.426.6570 / 636.272.7100 14
ELLIPTICAL ASSEMBLY STEPS (continued):
STEP 5: Attach Upper Body Cardio Arms (continued):
b1) Attach the inner Cardio Arm
Covers using 2 M5x8mm screws.
Hardware Required (Bag 5):
4 M5x8mm Screws
b2-ES900 ONLY)
Cardio Arm Covers using 2
M5x8mm screws.
Hardware Required (Bag 5):
4 M5x8mm Screws
STEP 6: Attach Pedal Tubes:
) Use 2 M10x80mm bolts and M10
nuts to attach Pedal Tubes. Make
sure that pedal tubes are centered on
the rollers on the Crankshaft before
tightening the bolts.
Hardware Required (Bag 6):
2 M10x80mm Bolts
2 M10 Nuts
To Next Page
Loading...
