CHAPTER 2: ASSEMBLY INSTRUCTIONS
CAUTION:
• Read a
nd understand all instructions and warnings prior to use.
• Obtain a medical exam before beginning any exercise program. If at any time during exercise you feel faint, dizzy,
or experience pain, stop and consult your physician.
• Obtain proper instruction prior to use.
• Inspect the bike for incorrect, worn, or loose components and do not use until corrected, replaced, or tightened
prior to use.
• Do not wear loose or dangling clothing while using bike.
• Care should be used when mounting or dismounting bike.
• Disconnect all power (if applicable) before servicing bike.
• Do not exceed maximum user weight of 400 lbs.
• Keep children and animals away.
• Use caution when moving and assembling bike.
• All exercise equipment is potentially hazardous. If attention is not paid to the conditions of equipment usage,
death, or serious injury could occur.
• Save these instructions.
*Should you need technical assistance in assembly of your TRUE Fitness product, contact TRUE Fitness Technical
Support at 1-800-883-8783.
PRE-ASSEMBLY CHECK LIST:
Provided Tools:
4
MM HEX WRENCH 5MM HEX WRENCH
6MM HEX WRENCH PEDAL WRENCH
Used during step 1, 2, 5 & 11
NOTE: Phillips Head Screwdriver (used during steps 9, 12, 13, & 14) is NOT provided
Truefitness.com / 800.426.6570 / 636.272.7100 7
To Next Page
Loading...
