STANDARD FEATURES
Model:
WARRANTY
One year warranty on all parts
& labor and an additional 4 year
warranty on compressor.
(U.S.A. only)
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
Model Elevation Right Plan 3D
PLAN VIEW
KCL
TRUE FOOD SERVICE EQUIPMENT
2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366 • (636)240-2400 • Fax (636)272-2408 • (800)325-6152 • Intl. Fax# (001)636-272-7546 • www.truemfg.com
T-19 TFE015E TFE015S TFE015P TFE0153
T-19
DESIGN
• True’s commitment to using the
highest quality materials and
oversized refrigeration systems
provides the user with colder product
temperatures, lower utility costs,
exceptional food safety and the
best value in today’s food service
marketplace.
REFRIGERATION SYSTEM
• Factory engineered, self-contained,
capillary tube system using
environmentally friendly (CFC free)
134A refrigerant.
• Extra large evaporator coil balanced
with higher horsepower compressor
and large condenser; maintains 33°F
to 38°F (.5°C to 3.3°C) for the best in
food preservation.
• Sealed, cast iron, self-lubricating
evaporator fan motor(s) and larger
fan blades give True reach-in’s a more
effi cient low velocity, high volume
airfl ow design. This unique design
ensures faster temperature recovery
and shorter run times in the busiest of
food service environments.
• Bottom mounted condensing unit
positioned for easy maintenance.
Compressor runs in coolest and most
grease free area of the kitchen.
Allows for storage area on top of unit.
CABINET CONSTRUCTION
• Exterior - 300 series stainless steel
front. Anodized quality aluminum
ends, back and top.
• Interior - attractive, NSF approved,
white aluminum liner. 300 series
stainless fl oor with coved corners.
• Insulation - entire cabinet structure
and solid door are foamed-in-
place using high density, CFC free,
polyurethane insulation.
• Welded, heavy duty galvanized frame
rail dipped in rust inhibiting enamel
paint for corrosion protection inside
and out.
• Frame rail fi tted with 2
1
/2" (64 mm)
diameter stem castors - locks provided
on front set.
DOOR
• 300 series stainless steel exterior
with white aluminum liner to match
cabinet interior. Door extends full
width of cabinet shell. Door lock
standard.
• Lifetime guaranteed recessed door
handle. Door fi tted with 12"
(305 mm) long recessed handle that
is foamed-in-place with a sheet
metal interlock to ensure permanent
attachment.
• Positive seal self-closing door. Lifetime
guaranteed door hinges and torsion
type closure system.
• Magnetic door gasket of one piece
construction, removable without tools
for ease of cleaning.
SHELVING
• Three (3) adjustable, heavy duty PVC
coated wire shelves 22
7
/8"L x 18
1
/4"D
(582 mm x 464 mm). Four (4) chrome
plated shelf clips included per shelf.
• Shelf support pilasters made of same
material as cabinet interior; shelves
are adjustable on
1
/2" (13 mm)
increments.
LIGHTING
• Incandescent interior lighting - safety
shielded. Lights activated by rocker
switch mounted above door.
MODEL FEATURES
• Exterior temperature display.
• Evaporator is epoxy coated to
eliminate the potential of corrosion.
• NSF-7 compliant for open food
product.
ELECTRICAL
• Unit completely pre-wired at factory
and ready for fi nal connection to a
115/60/1 phase - 15 amp dedicated
outlet. Cord and plug set included.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒ 230 - 240V / 50 Hz.
❒ 6" (153 mm) standard legs.
❒ 6" (153 mm) seismic/fl anged legs.
❒ Additional shelves.
❒ Remote cabinets (condensing unit
supplied by others; system comes
standard with 404A expansion valve
and requires R404A refrigerant).
Consult factory technical service
department for BTU information.
115/60/1
NEMA-5-15R
PLAN VIEW
T Series:
Reach-In Solid Door Refrigerator
27"
(686 mm)
25
17
/32"
(649 mm)
24
1
/2"
(623 mm)
50
1
/32"
(1271 mm)
73
3
/8"
(1864 mm)
ELEVATION
78
1
/2"
(1994 mm)
3
1
/4"
(83 mm)
75
1
/4"
(1912 mm)
1
7
/8"
(48 mm)
2
1
/2"
(64 mm)
To Previous Page
Loading...
Need help?
General
