To Next PageTo Next PageWhy True T-23 Refrigerator compressor voltage is below 90%?
If the voltage at the compressor terminals is below 90% of the nameplate voltage, it indicates a problem with the electrical supply. Check to determine if wire sizes are adequate, electrical connections are loose, the circuit is overloaded, or if the power supply is inadequate.
General| Manufacturer | True Manufacturing |
|---|---|
| Model | T-23 |
| Category | Refrigerator |
| Capacity | 23 cubic feet |
| Exterior Material | Stainless Steel |
| Number of Doors | 1 |
| Refrigerant | R290 |
| Voltage | 115V |
| Shelves | 3 adjustable shelves |
| Temperature Range | 33°F to 38°F |
| Interior Material | Aluminum interior with stainless steel floor |
| Door Type | Solid Swing Door |
Essential safety rules and guidelines for operating the appliance safely and preventing hazards.
Instructions for safely and responsibly discarding the old refrigerator or freezer unit.
Mandatory warning against using extension cords, as it voids the warranty and poses a safety risk.
Guidelines for using correct, authorized replacement parts to ensure safety and proper function.
Procedures for selecting the proper location and ensuring the unit is correctly leveled for optimal performance.
Step-by-step guide for attaching castors or optional legs to the unit for mobility and stability.
Instructions on how to operate, remove, and adjust the sliding doors for proper closure and sealing.
Guidance on wire gauge selection for voltage drop and proper electrical hookup procedures.
Steps for initial power connection, compressor readiness, and pre-operation checks.
Comprehensive guide to LAE controller functions, settings, locking, lights, defrost, and intervals.
Instructions for installing shelves and locating interior light switches on various models.
Procedures for setting and operating the defrost timer for freezer units.
Specific instructions for adjusting temperature controls for high elevation installations.
Diagnosing and resolving common compressor operational issues and freezer cabinet component failures.
Instructions for correctly installing the light cover for T-12FG models.
Step-by-step guide for cleaning the condenser coil to ensure efficient operation and prevent damage.
Guidelines for cleaning and maintaining stainless steel surfaces to prevent corrosion and damage.
Procedure for safely replacing interior and integrated door lighting bulbs.
Details of the product warranty coverage for units purchased in the USA and Canada.
