True T-23DT-HC User Manual

16
TRUE
T-23DT www.truemfg.com
ELECTRONIC TEMPERATURE CONTROLS -
DANFOSS:
1
Turning On Power
2
Turning Off Power
USING A DANFOSS ELECTRONIC CONTROL
WITH DIGITAL DISPLAY:
STEP 1 - Press the POWER button for 5 seconds
to power on the temperature control. See Figure 1.
STEP 2 - Press the POWER button for 5 seconds
to power off the temperature control. See Figure 2.
STEP 3 - Press the DEFROST button for 3 seconds
to defrost. See Figure 3.
STEP 4 - Press the UP button for 3 seconds to
display the set point /cut-out temperature. Press the UP
or DOWN button to raise or lower the
temperature. See Figure 4.
NOTE: The set point / cut-out temperature is NOT the
cabinet temperature.
STEP 5 - Press the UP button for 10 seconds, ºF or
ºC will display. Press the UP button to change from
°F to °C. See Figure 5.
Defrost
3
Cut Out Temperature
4
Celsius Temperature
5
HOW TO USE THE DANFOSS ELECTRONIC CONTROL
DEFROST DOWN UP POWER
DANFOSS ELECTRONIC TEMPERATURE CONTROLS

True T-23DT-HC Specifications

General

Brand	True
Model	T-23DT-HC
Category	Refrigerator
Language	English