22
TRUE
undercounter and worktop freezers
www
.truemfg.com
HOW TO CHANGE DISPLAY READOUT FROM
FAHRENHEIT TO CELSIUS:
May need to unlock control.
This can only be changed with the LAE model BR1 version of the control.
WHY: Changing readout will assist with customer application.
HOW TO CHANGE DISPLAY READOUT FROM
FAHRENHEIT TO CELSIUS:
STEP 1 - To change the display, press and hold the Info button and
the Stand-by button at the same time. “MdL” will appear. See image 1.
STEP 2 - Push the Down button until “ScL” appears. See image 2.
STEP 3 - Press and hold the Info button to see the “readout scale”.
See image 3.
STEP 4 - While pressing and holding the Info button , press the up
or down button to change the “readout scale". See image 4.
STEP 5 - Once the “readout scale” has been changed, release the info but-
ton .
STEP 6 - Wait 30 seconds for the display to show temperature. See image 5.
1
2
3
4
5
LAE Control
Manual Activation
Up Button
Info / Set Point
Button
Stand-By
Button
Manual Defrost /
Down Button
To Next Page
Loading...
