To Next PageTo Next Page
Need help?Do you have a question about the Truma APS 450-HF and is the answer not in the manual?
General| Output Voltage | 13.8 V DC |
|---|---|
| Output Power | 450 W |
| Battery Type | Lead-acid, AGM, Gel |
| Charging Voltage | 13.8 V DC |
| Protection Features | Overload, short circuit |
Device generates stabilised 12V DC from 230V AC for consumers in caravans.
Device is not a charger and may not be used to charge batteries.
Supplies filtered and stabilised 12V DC for all outputs, secured with plug-in fuses.
Overview of connection terminals (X0, X1, X2) and fuses (F1-F5) with their functions.
Device is operational upon connection to the mains supply.
Procedure for replacing faulty fuses with the same type after rectifying the fault.
Instructions on how to remove and attach the clamping space cover for fuse access.
Disconnect power supply before maintenance; clean with dry cloth.
Dispose according to administrative regulations and national laws.
Details on power supply, output voltage, power, dimensions, and weight.
Lists common errors, their causes, and rectification steps.
Qualified technicians must disconnect power and use correct cable/fuses for installation.
Device installation: away from damp, clean, dry, well-ventilated, free slits.
Ensure power is interrupted before connecting/disconnecting cables.
Connect to mains power supply according to local regulations by an expert.
