Need help?Do you have a question about the Truma Aventa compact and is the answer not in the manual?
General| Cooling Capacity | 1700 W |
|---|---|
| Power Consumption (Cooling) | 2.8 A |
| Weight | 27.5 kg |
| Refrigerant | R410A |
| Power Supply | 230 V / 50 Hz |
| Air Flow | 300 m³/h |
| Suitable for Vehicle Length | Up to 6 meters |
Only trained professionals should install, repair, or check the appliance. Follow all instructions and regulations.
Ensure proper installation, supervise children, prevent transport damage, and disconnect power before maintenance.
Always disconnect power before opening. Use only original Truma parts and identical fuses for replacements.
Verify campsite fuse protection (min. 4A). Park in shade and clean the roof for efficiency. Ventilate vehicle before operation.
Maintain moderate internal/external temperature differences. Keep doors/windows closed in cooling mode. Use high fan speed for faster cooling.
Avoid using the remote with CP plus or iNet Box. Use the Truma App for advanced control.
Overview of the remote control layout, buttons, and display symbols indicating various settings.
Details on Mode, Fan level, Time selection, Sleep function, Ambient lighting, Reset, Resend, and Setup buttons.
Check power supply, unwind cable drum, tune remote to IR receiver, switch on unit, and set desired temperature.
Select cooling, auto, or air circulation. Adjust fan speed. Activate Sleep function for quiet operation.
Set current time and program ON/OFF timer up to 24 hours in advance.
Control lighting brightness and on/off status. Reset remote to factory default settings.
Tune remote to system. Manual ON/OFF via IR receiver pushbutton. Understand LED status indicators.
Adjust air flow direction. Interpret red LED for faults and contact service if needed.
Dispose of components responsibly. Follow national regulations for appliance disposal.
Regular filter changes, cleaning air distributor panels, and keeping air inlets clear are essential.
Optional accessory for improving air quality.
Truma CP plus for integrated climate control and Truma iNet Box for app control.
Addresses problems like poor cooling, remote malfunction, water issues, and compressor cycling with remedies.
Details power requirements, consumption, cooling capacity, airflow, and operating limits.
Includes weight, dimensions, refrigerant type, GWP, and CO2 equivalent.
Specifies necessary clearances around external unit and air distributor for proper function.
Provides detailed diagrams for external unit and air distributor dimensions.
Illustrates the location and configuration of air inlets and outlets.
Describes the system for diverting condensation away from the vehicle.
Outlines Truma's warranty for material/manufacturing defects and consumer entitlements.
Details conditions that void the warranty, such as improper use or non-original parts.
Instructions on how to submit a warranty claim through authorized service partners or the Truma Service Centre.
To Next Page
