Truma Aventa compact - Operating Instructions; Remote Control Interface and Display; Key Remote Control Functions

4 EN
Operating instructions can be viewed in offline mode
with a mobile device and the Truma App. Download the
operating instructions when you have a WiFi connection and
save them on your mobile device.
Remote control
Figure 1
Sleep function
Ultra-quiet fan operation by
reducing the speed of both fans
* Ambient lighting
The lighting is dimmed by pressing
and holding down the button.
Pressing it again deactivates
or activates the lighting.
Mode
Mode selection button
– Cooling
–
Automatic
– Circulated air
Temperature selection buttons
16 – 31 °C
In 1 °C steps
On / O switch
Reset
Resets the remote control
to the factory settings.
Fan level
– low
– medium
– high
Resend
Retransmit data
T
ime selection
button
Time setting
Setting for clock time
and timer
T
imer selection button
Switch-on / switch-o time
can be set up to 24 hours in advance
*
No function in the case of air distributor small
Timer
On/O time
Cooling
Setup
Resend /
data tr
ansmission
Circulated
air
Fan level
Sleep function
Temperature
Time
Automatic
mode
Setup button
Tuning the remote control
and the IR receiver
Operating instructions
The symbols shown in the display become visible de-
pending on the setting