Truma iNet Box Installation Instructions

9
iNet Box
Table of Contents
Symbols used ........................................................................ 9
Installation instructions
Safety instructions ............................................................ 9
Intended use .......................................................................... 9
Scope of delivery .................................................................. 9
Dimensions ....................................................................... 10
Connections / control panels ......................................... 10
Displays ............................................................................. 10
Installation ........................................................................ 11
Selecting a location ............................................................. 11
Assembly ............................................................................. 11
Connect the GSM antenna .................................................. 11
Electrical connection ........................................................... 12
Connection combinations ................................................... 13
Example – CP plus / Combi / 1 air conditioning system ..... 14
Example – CP plus / Combi / 2 air conditioning systems ... 15
Example – 2 air conditioning systems ................................ 15
Symbols used
The appliance must only be installed and repaired by an
expert.
Symbol indicates possible hazards.
Note containing information and tips.
Installation instructions
Safety instructions
In-vehicle installations must comply with
the technical and administrative regu-
lations of the respective country of use
(e.g. EN 1648, VDE 0100-721). National
regulations and rules must be followed.
In other countries, the relevant regu-
lations must be observed.
Intended use
The iNet Box was developed for controlling iNet-capable Truma
appliances via mobile terminal devices (e.g. smartphones,
tablet PCs). Communication is via Bluetooth or GSM.
Scope of delivery
1 iNet Box
4 screws (depending on version)
1 Set of operating instructions
1 Set of installation instructions
1 12 / 24 V connector cable (+ = red / black – = black)
1 connector cable (TIN bus, depending on version)
1 cable binder (depending on version)

Truma iNet Box Specifications

General

Radio Frequency	868 MHz
Power Supply	12V DC
Bluetooth Range	10m
Interfaces	Bluetooth
Communication	Bluetooth, radio
Compatibility	Truma appliances
App Support	Truma App (iOS and Android)