To Next PageTo Next Page
Need help?Do you have a question about the Truma FrostControl and is the answer not in the manual?
General| Material | Plastic |
|---|---|
| Protection class | IP 44 |
| Type | FrostControl |
| Activation | Automatic opening at low temperatures |
| Operating voltage | 12 V |
| Weight | Approx. 110 g |
Explains hazard symbols, notes, intended use, and suitability for pumps.
Details the overpressure relief valve and frost monitor functions.
Procedure for filling the boiler, ensuring the rotary switch is set correctly.
Explains automatic opening below 3°C and warranty notes for frost damage.
Steps to manually open the drain valve by rotating the switch.
Instructions for closing the valve, considering ambient temperature.
Guidance on regular maintenance, cleaning, and waste disposal.
Information on the heating element accessory for the FrostControl.
Key specifications including pump pressure, system pressure, and temperature ranges.
Lists faults, causes, and remedies for common problems with the drain valve.
Advice on installing the FrostControl in the cold water supply and choosing a location.
Step-by-step guide for assembling the FrostControl unit in the vehicle.
Instructions for connecting water hoses and pipes, including pressure considerations.
