Need help?Do you have a question about the Truma MonoControl CE-0085CT0438 and is the answer not in the manual?
General| Approval | CE |
|---|---|
| Input Pressure | 30 mbar |
| Output Pressure | 30 mbar |
| Weight | 0.75 kg |
| Dimensions | 160 x 100 x 70 mm |
| Gas type | Propane/Butane |
| Regulator capacity | 1.5 kg/h |
| Model Number | CE-0085CT0438 |
| Crash sensor | Yes |
| Voltage | 12 V DC |
| Operating Temperature | -20°C to +60°C |
| Outlet connection | 8 mm |
The document number for these instructions is printed on each inside page.
These instructions apply exclusively to the MonoControl gas pressure regulator.
These instructions are aimed at users/vehicle owners.
Explains symbols and displays used in the instructions for clarity.
Details warnings used to alert against property damage and personal injury.
General safety guidelines and precautions to prevent damage and injury.
Guidance on proper installation and connection of components to prevent leaks.
Instructions for safe handling of liquid gas and cylinder positioning.
Ensures safe operation by detailing correct installation and ventilation requirements.
Defines the intended use of the product and prohibits other applications.
Lists and prohibits uses that are not compliant with the product's intended purpose.
Describes the gas system setup, pressure, and connections for the product.
Details the MonoControl as a safety gas pressure regulator according to EN 16129.
Explains the automatic safety device (Pressure Relief Valve) and its function.
Describes the function and operation of the reset button for gas checks.
Details the screw aid for ensuring correct tightening torque and preventing damage.
Advises on using a gas filter to minimize risks from chemical residues.
Information on where to find technical data and serial numbers on the product.
Describes the yellow sticker with operating pressure and safe use information.
Step-by-step guide to start up the gas system and appliances.
Instructions on how to reset the gas pressure regulator's reset button.
Procedure for safely changing the gas cylinder, including warnings.
Specific instructions for handling gas cylinders with a clip-on adapter.
Guidance on replacing the high-pressure hose, considering different connections.
Procedure for user to perform leak tests on the high-pressure section.
Requires expert checks for leak tests on the low-pressure section due to safety risks.
Provides the physical dimensions of the MonoControl unit in mm.
Details the coverage, duration, and terms of the manufacturer's warranty.
Lists conditions under which warranty claims are not applicable.
Provides instructions on how to initiate and process a warranty claim.
To Next Page
