To Next PageTo Next Page
Need help?Do you have a question about the Truma SDC12 and is the answer not in the manual?
General| Power Supply | 12 V DC |
|---|---|
| Dimensions | 130 x 90 x 35 mm |
| Weight | 200 g |
| Temperature Range | -20°C to +60°C |
| Communication Interface | CAN bus |
| Operating Temperature | -20 °C to +60 °C |
| Type | Controller |
Instructions for mounting the device safely and preventing hazards.
Guidelines for safe handling of electrical components and cables.
Defines the intended user and supervision requirements for the device.
Warns about explosive gases from batteries and ventilation needs.
Advises contacting dealer or service for repairs, no self-modification.
Recommends using only manufacturer-approved accessories.
Details the device's purpose, battery compatibility, and environment.
Tips for extending battery life, including charging and storage.
Identifies and labels the physical components of the charge controller.
Explains the device's charging mechanism, including protection features.
Guidelines for charging and storing partially discharged batteries.
Describes how controllers protect against excessive battery voltage.
Details the limitation of charging voltage for consumer protection.
Explains how to set battery type using DIP switches.
Lists available battery types and their settings for Main Battery 1.
Illustrates the basic charging curve with voltage and current over time.
Details the meaning of each LED status for operation and faults.
Instructions for cleaning and ensuring safe maintenance work.
Outlines the terms, conditions, and duration of the manufacturer's warranty.
Lists circumstances under which warranty claims will not be applicable.
Safety advice for electrical connections and device placement.
Procedure for submitting a warranty claim, including required details.
Lists the items included in the product package.
Guidance on how to securely mount the device.
Specifications for cable types and sizes for connection.
Instructions for connecting batteries and consumers to the controller.
Steps for connecting the primary battery to the controller.
Guidance on connecting solar panels, including parallel configurations.
Instructions for optionally connecting a starter battery.
Details on connecting the sensor for automatic voltage adjustment.
Information on connecting and viewing data via the LCD meter.
How the controller handles sensor faults or unreasonable values.
Steps to make the device operational after connection.
Guidance on proper disposal of the device and solar panel.
