Truma SDC12 - Charging Parameters and Process; Charging Process Diagram

9
Charging Parameters
Battery Type Boost Charging Voltage Float Charging Voltage Default Temperature
GEL 14.3 volts (3 – 10 hours) 13.8 volts 20°C
Lead Acid 14.4 volts (1.5 – 6 hours) 13.45 volts 20°C
AGM 14.7 volts (1.5 – 5 hours) 13.5 volts 20°C
LiFePO4 14.4volts (0.5 – 3 hours) 13.8 volts 20°C
Charging Process
Fig. 2: Charging chart (basic curve)