Truper MUT-105 - DC Voltage Measurement Specifications; AC Voltage Real RMS Specifications; DC Current Measurement Specifications

Range Resolution Precision
200 mA 100 µA (1,2% de rdg + 8 dgts)
20 A 10 mA (1,2% de rdg + 8 dgts)
ELECTRIC SPECIFICATIONS
DC VOLTAGE
Input resistance: 5 MΩ in mV range
Other ranges: 5 MΩ
Overload protection: 250 V DC or maximum value of AC
in 200 mV range
Maximum value: 1 000 V DC or AC in other ranges.
AC VOLTAGE REAL RMC
Input resistance: 10 MΩ
Overload protection: 1 000 V DC or AC peak value
Frequency maximum value response: (40 – 1 000) Hz
(For standard sine wave and triangular wave)
Display: Real RMS (only as reference, when over 200 Hz in other waves).
In AC range 750 V; AC 380 V can be tested and, 220 V commercial
energy. Press the key “HOLD” to show commercial energy frequency.
DC CURRENT
Overload protection: 250 V DC peak value
When using automatic recuperation fuses after eliminating the external
fault, the fuse goes back to normal and the multimeter can be used in a
normal manner.
Range Resolution Precision
200 mV 0,1 mV (0,8% de rdg + 5 dgts)
20 V 10 mV (0,8% de rdg + 3 dgts)
200 V 100 mV
1 000 V 1 V (1% de rdg + 5 dgts)
Range Resolution Precision
200 V 100 mV (1,0% de rdg + 8 dgts)
750 V 1 V (1,2% de rdg + 8 dgts)