Need help?Do you have a question about the Truper MUT-33 and is the answer not in the manual?
Essential rules to prevent electric shock, personal injury, and equipment damage.
Instructions for connecting probes and setting the range for voltage measurements.
Procedure for measuring direct current, including probe connection and range selection.
Steps for measuring electrical resistance, emphasizing circuit safety precautions.
Guide for testing diodes, including probe placement and expected readings.
Instructions for using the multimeter to measure temperature with a thermocouple.
Procedure for performing an auditive continuity test using the buzzer function.
Steps for measuring transistor gain (hFE) using the dedicated socket.
Guidance on replacing batteries and fuses for multimeter maintenance.
Essential rules to prevent electric shock, personal injury, and equipment damage.
Instructions for connecting probes and setting the range for voltage measurements.
Procedure for measuring direct current, including probe connection and range selection.
Steps for measuring electrical resistance, emphasizing circuit safety precautions.
Guide for testing diodes, including probe placement and expected readings.
Instructions for using the multimeter to measure temperature with a thermocouple.
Procedure for performing an auditive continuity test using the buzzer function.
Steps for measuring transistor gain (hFE) using the dedicated socket.
Guidance on replacing batteries and fuses for multimeter maintenance.
General| Continuity Test | Yes |
|---|---|
| Diode Test | Yes |
| Power Supply | 9V battery |
| Transistor Test | Yes |
| DC Current Range | 200µA - 10A |
| Resistance Range | 200Ω |
| Battery Test | 1.5V |
| AC Voltage Range | 200V - 600V |
To Next Page
