Need help?Do you have a question about the Truper PULA-7A3 and is the answer not in the manual?
Comprehensive safety guidelines covering work area, electrical, and personal safety.
Critical safety warnings and precautions specific to operating polishers.
Visual overview and labeling of all polisher components.
Instructions for attaching the auxiliary handle to the polisher.
Steps for attaching the polishing bonnet and disc to the polisher.
How to start and operate the tool for intermittent and continuous use.
Guide to selecting and adjusting the tool's speed settings.
Proper grip, handling techniques, and guidelines for the polishing process.
Instructions for cleaning, checking, and maintaining the tool.
Step-by-step instructions for replacing worn carbon brushes.
Recommendations for tool storage and critical warnings about kickback.
Blank section for user notes and references.
Comprehensive safety guidelines covering work area, electrical, and personal safety.
Critical safety warnings and precautions specific to operating polishers.
Visual overview and labeling of all polisher components.
Instructions for attaching the auxiliary handle to the polisher.
Steps for attaching the polishing bonnet and disc to the polisher.
How to start and operate the tool for intermittent and continuous use.
Guide to selecting and adjusting the tool's speed settings.
Proper grip, handling techniques, and guidelines for the polishing process.
Instructions for cleaning, checking, and maintaining the tool.
Step-by-step instructions for replacing worn carbon brushes.
Recommendations for tool storage and critical warnings about kickback.
Blank section for user notes and references.
General| Power | 250 W |
|---|---|
| Voltage | 127 V |
| Frequency | 60 Hz |
| No load speed | 12, 000 rpm |
| Cord Length | 2 m |
| Type | Orbital Sander |
| Disc diameter | 5 inches |
| Spindle thread | Not applicable |
To Next Page
