Auxiliary
handle
Polishing
bonnet
Polishing
bonnet
Spindle
lock
Orifices to screw on
the auxiliary handle.
Continuous
use button
Spindle
lock
Hook and loop
backing disc
Trigger
switch
Hook and loop
backing disc
Carbon brush
housing cap (x2)
Handle
Handle
Speed
control
Speed
table
Assembly
• Align the auxiliary handle with the polisher head and
match the screw orifices.
• Screw firmly the auxiliary handle to the polisher head
using the included screws.
Auxiliary handle assembly
• Adhere the bonnet to the Hook and loop backing disc.
• Press the spindle lock (A) and mount the disc into the
polisher head. Screw it tight.
• To remove the disc, press the spindle lock and unscrew
the disc.
• The spindle lock can only be
tightened when mounting or dismounting the disc. It shall
never be pressed to stop the disc while polishing.
Otherwise the tool may get damaged and exposes you to
personal injury.
Disc Assembly
A
CAUTION
7
Parts
ENGLISH
M14x2
Power
supply cable
Power cord
protector
To Next Page
Loading...
