Need help?Do you have a question about the Truper ROTI-20N and is the answer not in the manual?
Cordless hammer drill / drill / driver.
Details the 1/2" keyless chuck, speeds up to 1800 RPM and 27000 SPM.
Lithium-Ion 20V 2Ah battery, 50 min charge time; 120V charger.
Guide for selecting extension cable gauge based on length and amperage for power loss prevention.
Use of grounded extension cables labeled 'For Outdoors Use' for outdoor operation.
Keep area clean, avoid explosive atmospheres, keep bystanders away.
Match plug to outlet, avoid grounded surfaces, protect from rain/liquids.
Stay alert, use PPE, prevent unintentional starting, maintain balance.
Do not force, use correct tool, check switch, disconnect before adjustments.
Use specified chargers/batteries, avoid extreme temperatures, handle leaks carefully.
Use only specified charger/batteries; avoid fire, impact, extreme temps, and short circuits.
Choose the right bit for the workpiece to avoid injury and ensure ease of use.
Assess job, check bit, verify switch is OFF before inserting battery.
Hold by isolated surfaces, use auxiliary handles, do not overload, release trigger if stuck.
Identifies chuck, torque regulator, speed selector, switch, handle, battery, charger, etc.
Steps for plugging in the charger, inserting battery, and interpreting indicator lights.
What to do if red light blinks (defective battery) or green light blinks (temp issue).
Initial charge duration, normal charge times, temperature limits for battery use and charging.
How to assemble bits and change rotation direction safely.
Choosing between low/high speed and hammer drill/drill modes.
Selecting the correct torque level for screws based on size and material.
Using the variable speed trigger and understanding its braking function.
Recommendations for pilot holes, bit types, and handling stuck screws.
Tips for large holes, deep holes, and avoiding bit damage.
Addresses issues like low efficiency, trigger not pushing, battery leaks, and charging problems.
How to clean the tool, tighten screws, and disconnect battery before cleaning.
Emphasizes servicing only at authorized centers and the risk of voiding warranty.
Instructions for disposing of the tool and batteries responsibly at authorized sites.
Instructions on finding updated lists and contact numbers on the Truper website.
Details the 3-year warranty against manufacturing defects, exceptions, and how to make it valid.
Information on where to present the product for warranty claims or spare parts purchase.
Cordless hammer drill / drill / driver.
Details the 1/2" keyless chuck, speeds up to 1800 RPM and 27000 SPM.
Lithium-Ion 20V 2Ah battery, 50 min charge time; 120V charger.
Guide for selecting extension cable gauge based on length and amperage for power loss prevention.
Use of grounded extension cables labeled 'For Outdoors Use' for outdoor operation.
Keep area clean, avoid explosive atmospheres, keep bystanders away.
Match plug to outlet, avoid grounded surfaces, protect from rain/liquids.
Stay alert, use PPE, prevent unintentional starting, maintain balance.
Do not force, use correct tool, check switch, disconnect before adjustments.
Use specified chargers/batteries, avoid extreme temperatures, handle leaks carefully.
Use only specified charger/batteries; avoid fire, impact, extreme temps, and short circuits.
Choose the right bit for the workpiece to avoid injury and ensure ease of use.
Assess job, check bit, verify switch is OFF before inserting battery.
Hold by isolated surfaces, use auxiliary handles, do not overload, release trigger if stuck.
Identifies chuck, torque regulator, speed selector, switch, handle, battery, charger, etc.
Steps for plugging in the charger, inserting battery, and interpreting indicator lights.
What to do if red light blinks (defective battery) or green light blinks (temp issue).
Initial charge duration, normal charge times, temperature limits for battery use and charging.
How to assemble bits and change rotation direction safely.
Choosing between low/high speed and hammer drill/drill modes.
Selecting the correct torque level for screws based on size and material.
Using the variable speed trigger and understanding its braking function.
Recommendations for pilot holes, bit types, and handling stuck screws.
Tips for large holes, deep holes, and avoiding bit damage.
Addresses issues like low efficiency, trigger not pushing, battery leaks, and charging problems.
How to clean the tool, tighten screws, and disconnect battery before cleaning.
Emphasizes servicing only at authorized centers and the risk of voiding warranty.
Instructions for disposing of the tool and batteries responsibly at authorized sites.
Instructions on finding updated lists and contact numbers on the Truper website.
Details the 3-year warranty against manufacturing defects, exceptions, and how to make it valid.
Information on where to present the product for warranty claims or spare parts purchase.
To Next Page
General
