Need help?Do you have a question about the Truper ROTO-1/2A7 and is the answer not in the manual?
Covers work area, electrical safety, and personal safety guidelines.
Covers tool usage, maintenance, storage, and service recommendations.
Select appropriate drill bits for material to reduce injury and improve ease of use.
Assess the job and follow safety rules before operating the tool.
Use auxiliary handles, hold tool properly, avoid forcing, and react to stuck bits.
How to insert and securely fasten drill bits into the chuck.
Instructions for intermittent and continuous operation modes.
How to adjust the tool's speed using the speed control dial.
How to switch between hammer and drill modes based on material.
How to change the drill's rotation direction for forward or reverse use.
How to position and secure the auxiliary handle and depth control rod.
Procedures for drilling holes in wood using appropriate bits and speeds.
Guidelines for drilling metal, including bit selection and lubrication.
Procedures for drilling into brick, tile, and concrete with proper pressure.
Step-by-step guide for safely replacing the drill chuck.
How to clean the tool and check mounting screws for proper upkeep.
Emphasizes using authorized service centers for repairs.
Recommends professional lubrication for the tool's transmission.
Guidance on checking and replacing carbon brushes for optimal performance.
Covers work area, electrical safety, and personal safety guidelines.
Covers tool usage, maintenance, storage, and service recommendations.
Select appropriate drill bits for material to reduce injury and improve ease of use.
Assess the job and follow safety rules before operating the tool.
Use auxiliary handles, hold tool properly, avoid forcing, and react to stuck bits.
How to insert and securely fasten drill bits into the chuck.
Instructions for intermittent and continuous operation modes.
How to adjust the tool's speed using the speed control dial.
How to switch between hammer and drill modes based on material.
How to change the drill's rotation direction for forward or reverse use.
How to position and secure the auxiliary handle and depth control rod.
Procedures for drilling holes in wood using appropriate bits and speeds.
Guidelines for drilling metal, including bit selection and lubrication.
Procedures for drilling into brick, tile, and concrete with proper pressure.
Step-by-step guide for safely replacing the drill chuck.
How to clean the tool and check mounting screws for proper upkeep.
Emphasizes using authorized service centers for repairs.
Recommends professional lubrication for the tool's transmission.
Guidance on checking and replacing carbon brushes for optimal performance.
General| Chuck Size | 1/2 inch |
|---|---|
| Amperage | 7 A |
| Voltage | 120 V |
| No Load Speed | 0-3000 RPM |
| Weight | 2.5 kg |
To Next Page
