Need help?Do you have a question about the Trust TC Series and is the answer not in the manual?
Provides torque specifications for various pipe sizes used during installation.
Guidance on selecting appropriate power cords based on the appliance's rated current.
Details maximum pipe length, elevation difference, and refrigerant charge for different models.
Covers initial installation steps, including leak testing, evacuation, and refrigerant purging.
Procedure for adding refrigerant to systems that have been running for many years.
Steps for re-installing the unit when the indoor component requires repair.
Steps for re-installing the unit when the outdoor component requires repair.
Specifies optimal room and outdoor temperature ranges for cooling, heating, and drying modes.
Important notes regarding operating outside specified conditions and humidity effects.
Defines common abbreviations used for temperature sensors (T1-T5) and other parameters.
Explains the meaning of icons and digital displays on the indoor unit's display board.
Details various protection mechanisms for the compressor, fan, inverter module, sensors, and system.
Introduces the different operating modes including Fan, Cooling, Heating, Auto, Drying, and Forced modes.
Details the settings and operation characteristics of the Fan-only mode.
Explains compressor, outdoor fan, and indoor fan running rules in cooling mode.
Covers compressor, outdoor fan, and indoor fan rules, plus defrosting and evaporator protection.
Describes the Auto mode logic and the fixed settings for Drying mode operation.
Covers Forced operation, Timer, Economy (Sleep), and Auto-Restart functions.
Details Refrigerant Leakage Detection, Louver Memory, 8°C Heating, Self Clean, and Follow Me.
Explains Silence mode for reduced noise and the Point Check function for system diagnostics.
Provides torque specifications for various pipe sizes used during installation.
Guidance on selecting appropriate power cords based on the appliance's rated current.
Details maximum pipe length, elevation difference, and refrigerant charge for different models.
Covers initial installation steps, including leak testing, evacuation, and refrigerant purging.
Procedure for adding refrigerant to systems that have been running for many years.
Steps for re-installing the unit when the indoor component requires repair.
Steps for re-installing the unit when the outdoor component requires repair.
Specifies optimal room and outdoor temperature ranges for cooling, heating, and drying modes.
Important notes regarding operating outside specified conditions and humidity effects.
Defines common abbreviations used for temperature sensors (T1-T5) and other parameters.
Explains the meaning of icons and digital displays on the indoor unit's display board.
Details various protection mechanisms for the compressor, fan, inverter module, sensors, and system.
Introduces the different operating modes including Fan, Cooling, Heating, Auto, Drying, and Forced modes.
Details the settings and operation characteristics of the Fan-only mode.
Explains compressor, outdoor fan, and indoor fan running rules in cooling mode.
Covers compressor, outdoor fan, and indoor fan rules, plus defrosting and evaporator protection.
Describes the Auto mode logic and the fixed settings for Drying mode operation.
Covers Forced operation, Timer, Economy (Sleep), and Auto-Restart functions.
Details Refrigerant Leakage Detection, Louver Memory, 8°C Heating, Self Clean, and Follow Me.
Explains Silence mode for reduced noise and the Point Check function for system diagnostics.
General| Brand | Trust |
|---|---|
| Model | TC Series |
| Category | Air Conditioner |
| Language | English |
To Next Page
