The wheels must be attached before the heater is operated.
Swivel wheels are supplied with the device. You must mount them on the supplied mounting plates and
then attach these wheels to the unit before use.
WARNING: Do not
operate it without the wheels. Only operate the heater in an upright position (wheels on
the bottom and control elements on top), any other position would be dangerous.
Power level indicators Function indicators
Low
Medium Timer
High Power
The unit can be operated using the remote control or the control panel on the side of the unit. The keys have
the
same functions.
Power
: switch on or standby
Mode
: power level selection
Timer
: timer setting
Temperature setting : Temp up / Temp down
ASSEMBLY INSTRUCTIONS
OPERATION FUNCTIONS
CONTROL BUTTONS
To Next Page
Loading...