When the appliance is on, you can set the timer to automatically turn off the heater after a certain time (1
-
12 hours from the time the function is set). To set the self
-
timer, proceed as follows :
Press the timer button several times to set the number of hours after which the unit should turn off.
On the display screen, the timer icon lights up when the timer is set. It turns off when the unit turns off
at the set time.
The heater switches on and off according to the set temperature and stops working when
the set time
has elapsed.
Example:
It is now 4pm. The heater is on and you want to turn it off automatically at 11pm. Set the timer
-
off
function to 7 hours; the unit turns on and off to maintain the set temperature. It will stop at 11pm and go
into standby
mode.
You can also set the timer to automatically turn the unit on after a certain time (1 to 12 hours from the time
the function is set).
Press the power switch on the side of the unit to power the unit.
Press the timer button several times to set the number of hours after which the heater should be
switched on.
On the display screen, the timer icon lights up when the timer is set. It turns off when the unit turns on
at the programmed time.
The heater switches on automati
cally when the time expires. It will then turn on and off according to the
temperature and power level settings set.
Example
: It is now 4pm. You want the heater to turn on at 6:00 p.m. Set the timer function to 2 hours; the
heater will start operating at 6 p.m.
Note
: The automatic start and stop functions cannot be combined. In other words, once you have set the
heater to turn on automatically, you cannot set it to turn off automatically.
The unit has a thermostat that allows you
to set the temperature from 59°F to 95°F. Once the temperature
has been set, the unit remains on until the room temperature reaches the temperature of the digital display.
The thermostat then turns on and off to maintain the set room temperature.
Turn on the unit and set the desired power level.
Then use the [ + / ] and [
-
/ ] buttons to set the desired temperature, between 59°F and 95°F.
On the display screen, the set temperature lights up.
While the unit is heating the room, the thermometer symbol continues to flash until the set temperature
is
reached.
It
will
then
remain
on
until
the
heater
turns
on
again
when
the
room
temperature
drops
below the set temperature.
SETTING THE TEMPERATURE
SETTING THE TIMER（auto-off）
SETTING
THE
TIMER
（
auto-on
）
To Next Page
Loading...