Manual of Mid-drive Conversion Motor——TSDZ2B
Document No.：TSE-PM-MM-TSDZ2B-A-00
Suzhou Tongsheng Electric Appliances Co., Ltd 10 / 10
6 Packing
6.1 Standard Packing -Without Logo(Default)
6.2 Standard Packing -With Logo
6.3 Customized Packaging
The first layer of packaging for this motor can be customized. But the cost of customized packaging is
not included in the quotation of standard products and needs to be calculated separately upon actual
customized requirements. The scope of customized packaging includes the following two situations:
1) Printing other content on the default packing.
2) Packaging of other sizes or appearances.
6.4 Packing Materials and Norm
1) Packing Materials: Carton packaging with environmentally friendly, energy-saving, and recyclable
materials.
2) Packing Norm: Motor of 1pc/carton (Only referring to the first layer packaging of the motor).
7 Usage and Storage Conditions
7.1 Normal Using Condition
Environmental temperature: -15 ° C to 40 ° C
Relative humidity: ≤ 95%
Atmospheric pressure: 86Kpa-106KPa
7.2 Storage Condition
The motor should be stored in a clean and well-ventilated warehouse with no corrosive gases in the air.
Environmental temperature: 0 ℃~35 ℃
Relative humidity: ≤ 85%
250mm
230mm
This standard packing without logo will be used
as default if there’s no indication for the
packing in the order.
Please indicate “Standard Packing with Logo”
in the order if you choose this packing.
230mm
To Previous Page