* It is the license plate indication by the bulb manufacturer. The duration is variable and depends on the frequency of ON/OFF operations as well.
4 GENERAL PRECAUTIONS
The user safety and that of others is very important. Using Willmop 35 safely is a responsibility. In addition to the information
contained in this operating manual, all safety and accident prevention regulations must be observed.
Do not use Willmop 35 unless the user:
is trained and authorized to do so;
has read and understood this operating manual.
When using Willmop 35 it is important to:
remove objects from the floor that could be accidentally pushed by the rotation of the brushes;
keep hands and feet away from the rotation of the brushes;
not use Willmop 35 near flammable dusts, liquids or vapors. Never use a flammable solvent as a detergent;
not use Willmop 35 when flammable or poisonous liquids such as gasoline, oil, acids or other volatile substances are present on
the floor;
pay attention during maneuvers;
dress securely. Do not wear loose or hanging tie, scarf or clothing or jewelery while using Willmop 35 as they could get caught in
rotating parts, causing serious injury or death.
When finish using Willmop 35 it is important to:
turn off Willmop 35 by rotsting the program selector on the console to the OFF position;
store Willmop 35 on a flat surface;
empty and rinse the recovery tank;
check the battery charge and recharge in case of low battery.
Before performing Willmop 35 maintenance it is necessary to:
To Next Page
Loading...
General