To Next PageTo Next Page
Need help?Do you have a question about the TSM WILLMOP 35 and is the answer not in the manual?
Verify all supplied materials and check for transit damage.
Safety guidelines for grounding the charger in commercial settings.
Step-by-step instructions for removing the machine from its packaging.
Procedures for inserting and recharging the machine's battery.
Instructions for installing brushes or pads onto the machine.
Steps for attaching the squeegee to the machine.
Initial steps to begin operating the machine.
Guide on how to fill the fresh water tank.
Instructions for managing the dirty water recovery tank.
How to choose the correct cleaning program.
How to check the remaining battery charge.
Location and method to check the machine's operating hours.
Basic instructions for using the machine during cleaning.
Proper angle and function of the rear squeegee blade.
How to properly empty the clean and dirty water tanks.
Safe methods for moving the machine within a building.
Instructions for safely lifting the machine.
Proper procedures for parking the machine.
Daily cleaning and checks after each operation.
Instructions for cleaning and checking brushes.
Instructions for cleaning and checking the squeegee.
How to replace worn squeegee blades.
Routine weekly cleaning tasks for the machine.
Monthly checks and cleaning procedures.
Information on approved accessories and spare parts.
Steps to diagnose and resolve startup issues.
Troubleshooting for the two-handed handle grasp requirement.
How to address issues with blocked brushes.
Steps to take when brushes suddenly stop working.
Resolving problems with the battery display.
Diagnosing and fixing low water output.
Troubleshooting steps for ineffective cleaning performance.
Addressing issues with the vacuum system.
Solutions for too much foam during operation.
General