24
*The precise angle depends on the distance of the knife blade relative to the
edge of the clamping jaws, the thickness of the sharpening stone together
with the blank, the use of an abrasive thickness compensator. The maximum
deviation of the table data from the actual sharpening angle when using the
abrasive thickness compensator in the upper position is 25±2 %. Moving the CE
in the jaws at a distance of 17±8 mm leads to a deviation of the scale readings
from the actual sharpening angle by 4±1%.
5.12 Using Axicube angle nder:
For a more accurate angle setting, use the Axicube digital angle nder:
◆ place the angle nder on the angle nder stand (1) on the abrasive holder, with the abrasive in the
holder set against the blade of the knife (2) installed in the clamps;
◆ turn it on using the button and set the readings of the device to zero by the button ;
◆ without switching it off, move it to the platform of the angle nder (3) on the body of the lifting
mechanism;
◆ the angle nder will show the angle of sharpening of the given side of the knife with an accuracy
of 0.1°;
◆ set the sharpening angle according to step 5.11.
More about the
Axicube:
(g. 13)
The Axicube digital angle nder is specially designed for sharpening systems.
It has magnets on three planes, detects the smallest changes with an accuracy of
up to 0.05° degrees, allows to set the angle with precise accuracy. The Axicube is
placed on the device facing the sharpener, which makes the process of setting the
sharpening angle more comfortable. Built-in rechargeable battery is charged via
USB cable. Battery life is 5 years in continuous operation.
1
3
2
To Next Page
Loading...
