4 - RECONNECT THE GLASS DOME TO THE ATOMIZER
5 - BEGIN VAPING BY PRESSING AND HOLDING DOWN
THE POWER BUTTON WHILE INHALING THROUGH
GLASS DOME,KEEP POWER BUTTON PRESSED DOWN
WHILE VAPING. THE ATOMIZER PRODUCES 2-3 PUFFS
AND WILL NEED TO BE REPACKED ONCE 3 PUFFS ARE
REACHED
5C - LOADING WAX
1 - ATTACH THE ATOMIZER WITH GLASS DOME TO YOUR
BATTERY, ATOMIZER SHOULD FIT TIGHTLY
2 - REMOVE THE GLASS DOME FROM THE WAX ATOMIZER
3 - PLACE A VERY SMALL AMOUNT OF WAX DIRECTLY TO
THE COIL WITHOUT PRESSING DOWN ON THE COIL
10 11
PRESS & HOLD
POWER BUT-
TON TO BEGIN
VAPING
To Next Page
Loading...