TT Micro TINY AUDIO C3 - Music Player Connection; Device Charging; LCD Display Dimmer Control

To Next Page

To Previous Page

Tiny Audio C3

To connect an external music player:

Press “MODE” button until you see “AUX IN” mode. If you can’t find “AUX IN”

mode, then press and hold “MENU” button to enter menu,

1. Use Tuning Knob to scroll up or down to select “Aux IN/OUT Select”, press

“MENU” button to confirm,

2. In “AUX IN/OUT Select” menu, use Tuning Knob to select “AUX IN” and

confirm by pressing “MENU” button again,

Connect an external audio source such as iPad2/iPhone/iPod or MP3

player etc. into “AUX IN” jack on the right-hand side of TINY AUDIO C3

with the provided 3.5mm audio cable.

Charging iPad/iPhone/iPod/mobile phones/tablets/camera:

1. Using your mobile phone USB cable and plug the USB connector into the

dual USB car charger with 12V socket,

2. Connect the other end of the cable to your device and start charging.

(Charging Power Output: 5V, 1A, the current is big enough for iPad

charging)

LCD display Dimmer Control:

When drive at night, you may control the brightness of the color LCD display by

press and hold the “MODE” button to dim the display. Press and hold the “MODE”

button again to return to normal brightness level.