TTC FIREBERD 6000A User Manual

-
2MINx64 Out-of-Sewice BERT
Tab& I lists intportmrtMYLFISRESULTS tkt sbouki & cbecM
I
Table 7 -Analysis Results
BUM BIT ERRS
BER
PAT SLIP
T-CARRIER CODE ERR
PRA ERR
CRC ERR
PRAUlSS
BIT SUP
RCVNEAS
RCV MEAS
RCVm
L SIGNAL +LVL dB
-LvL dB
GFN ERGQ
Rcv mEQ
ALARM .US SEC
FAS
DIS S
MF DIS S
Bit Errors
Bit Emr
Me
Panern
Slips
Code Errors
Frame Errors
CRC mrs
Frame Loss
Bit Slips (used with RE3Tl)
Received
MAS Word
Received MFAS Word (ifTS16 is active)
Received
Timeslot Byte
Positive Receive Signal Level
Negative Receive Signd level
Generator Clock Frequency
Receive Frequency
AIS Seconds
FAS Distant Alm Seconds
MEAS Distant Alarm Seconds
T& 2 is a list of IMgRPAQI STATIiS LEDs. Wben illuminated each of tbe stahrs LhDs rnan tbefhhdng:
I Table 2 - Interface Status LEDs
CODE
ALM1
ALM2
Not in use on the 41800 interface.
Illuminates when a PAS Distant Alarm is being received (the A-bit is set to 11,
Illuminates when AIS is being received.
TTC Technical Support
1-800-638-2049
PB6000-2M.Out-SetVic~.2/3.97
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

TTC FIREBERD 6000A Specifications

General

Brand	TTC
Model	FIREBERD 6000A
Category	Test Equipment
Language	English