Need help?Do you have a question about the TTI Pool Heat Pump and is the answer not in the manual?
Explains the cost savings and efficiency of pool heat pumps.
Details the thermodynamic principle behind pool heat pump operation.
Discusses the design for reduced maintenance requirements.
Requirements for adequate airflow and installation space.
Additional guidance on optimal placement and environmental factors.
Installation guidelines for chemical treatment systems.
Specific connection details for pressure-type chemical feeders.
Recommended installation of in-line chemical feeders.
Specific directives for connecting salt chlorinators.
Instructions for installing multiple heat pumps in parallel.
Configuration for shared filtration systems.
Configuration for separate filtration systems.
Procedures for routine cleaning of the unit and filter.
Steps to prepare the unit for winter storage.
Steps to prepare the unit for winter storage.
Guide for starting the heat pump at the beginning of the season.
Procedure for isolating the heat pump from the water circuit.
Importance of maintaining water chemistry for equipment and swimmers.
Recommended chemical concentrations for pool water.
Guidelines for performing a shock treatment safely.
Information on using trichlor as a sanitizer.
Information on using bromine as a sanitizer.
Information on using liquid chlorine as a sanitizer.
Information on using granular chlorine as a sanitizer.
Information on using salt-based chlorine generation.
Recommends regular testing of pool water parameters.
Guidance on adjusting water chemistry to meet standards.
Steps to take when pool water is outside established standards.
Identification of control panel components and LEDs.
Detailed explanation of the control panel interface and buttons.
Instructions for operating the heat pump control functions.
Procedure for calibrating the water temperature sensor.
Procedure for calibrating the defrost temperature sensor.
Adjusting the evaporator temperature for defrost initiation.
Adjusting the evaporator temperature for defrost termination.
Setting the temperature difference for operation cycles.
Configuring the delay before compressor restart after defrost.
Adjusting setpoint or exiting the service menu.
Overview of the limited warranty terms.
Specific warranty duration for parts and electronics.
Warranty duration for labor services.
Warranty period for the cupro-nickel heat exchanger.
Warranty duration for the resin cabinet.
Lifetime warranty for titanium heat exchanger parts.
Explains the cost savings and efficiency of pool heat pumps.
Details the thermodynamic principle behind pool heat pump operation.
Discusses the design for reduced maintenance requirements.
Requirements for adequate airflow and installation space.
Additional guidance on optimal placement and environmental factors.
Installation guidelines for chemical treatment systems.
Specific connection details for pressure-type chemical feeders.
Recommended installation of in-line chemical feeders.
Specific directives for connecting salt chlorinators.
Instructions for installing multiple heat pumps in parallel.
Configuration for shared filtration systems.
Configuration for separate filtration systems.
Procedures for routine cleaning of the unit and filter.
Steps to prepare the unit for winter storage.
Steps to prepare the unit for winter storage.
Guide for starting the heat pump at the beginning of the season.
Procedure for isolating the heat pump from the water circuit.
Importance of maintaining water chemistry for equipment and swimmers.
Recommended chemical concentrations for pool water.
Guidelines for performing a shock treatment safely.
Information on using trichlor as a sanitizer.
Information on using bromine as a sanitizer.
Information on using liquid chlorine as a sanitizer.
Information on using granular chlorine as a sanitizer.
Information on using salt-based chlorine generation.
Recommends regular testing of pool water parameters.
Guidance on adjusting water chemistry to meet standards.
Steps to take when pool water is outside established standards.
Identification of control panel components and LEDs.
Detailed explanation of the control panel interface and buttons.
Instructions for operating the heat pump control functions.
Procedure for calibrating the water temperature sensor.
Procedure for calibrating the defrost temperature sensor.
Adjusting the evaporator temperature for defrost initiation.
Adjusting the evaporator temperature for defrost termination.
Setting the temperature difference for operation cycles.
Configuring the delay before compressor restart after defrost.
Adjusting setpoint or exiting the service menu.
Overview of the limited warranty terms.
Specific warranty duration for parts and electronics.
Warranty duration for labor services.
Warranty period for the cupro-nickel heat exchanger.
Warranty duration for the resin cabinet.
Lifetime warranty for titanium heat exchanger parts.
General| Brand | TTI |
|---|---|
| Model | Pool Heat Pump |
| Category | Swimming Pool Heater |
| Language | English |
To Next Page