5
English
GB
FR DE ES IT NL PT DK SE FI NO RU PL CZ HU RO LV LT EE HR SI SK GR TR
the knob caused by vibration during use.
Quick coupler
The air station has a 6.4 mm quick connect coupler
located on the side of the unit.
Regulatory pressure gauge
The current line pressure is displayed on the regulatory
pressure gauge. This pressure can be adjusted by rotating
the pressure regulator knob.
Safety valve
The safety valve is designed to automatically release air if
the air tank pressure exceeds the preset maximum.
Side connect storage areas
The side connect storage areas can secure up to two
pneumatic nailers.
Tank pressure gauge
The tank pressure gauge indicates the pressure of the air
in the tank.
Vertical storage
The air station has been designed to safely stow in the
horizontal or upright position.
Work seat
The air station has a built in work seat that can hold up
to 114 kg.
ELECTRICAL DRAWING
N
L
220V240V~
SWITCH
PRESSURE SWITCH
TEMPERATURE SAFED
PE
M
ST
SPARE PARTS
Pressure switch QYK/20PS series
Electromagnetic switch KJD17B
STOPPING THE MACHINE DURING EMERGENCY
1. The machine is equipped with a main switch; it can be
used to stop the machine in an emergency situation.
Press the cap of the power switch to cut off power.
2. Open the cap by pushing the button as shown.
3. Press the green button to restart the unit.
OPERATION
DANGER
Do not disassemble check valve, tank drain valves or
safety relief valve with air in tank — bleed tank. Failure
to depressurize tank could result in explosion and/or
serious personal injury.
WARNING
Do not allow familiarity with tools to make you careless.
Remember that a careless fraction of a second is
suf cient to in ict serious injury.
To Next Page
Loading...