EasyManua.ls Logo

TTS Blue-Bot - Low Power Sleep Mode

TTS Blue-Bot
11 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Blue-Bot
TM
¥ Eyes light up red to show Blue-Bot is charging.
¥ Eyes change to green when Blue-Bot is fully charged.
¥ It may take up to 2 hours to fully charge Blue-Bot if the battery has been fully
discharged.
¥ Once fully charged Blue-Bot will have approx. 6 hours of normal usage, approx.
1.5 hours when in continuous use.
¥ The unit must be switched off to charge to help speed up the charging process.
¥ To get the best out of Blue-Bots battery life we recommend that the unit is fully charged
after every use.
¥ We also do not recommend that you leave Blue-Bot on continuous charge. Once the
eyes turn green please remove from charge.
¥ We recommend that you give Blue-Bot at least one full change every 3 months even if it
hasn't been used to prevent the battery from deteriorating.
Blue-bot's eyes are used to provide some basic information:
¥ Solid Blue - connected via Bluetooth.
¥ Solid Red - Charging.
¥ Flashing Red - Low battery. Blue-Bot needs charging.
¥ Solid Green - Fully charged.
Low Power Sleep Mode
¥ If your Blue-Bot is not used for 2 minutes and the sensor switch is in the 'OFF' position,
Blue-Bot will play a sound and go into sleep mode.
¥ If your Blue-Bot is not used for 4 minutes and the sensor switch is in the 'ON' position,
Blue-Bot will play a sound and go into sleep mode.
¥ In sleep mode, very little power is consumed and the batteries will last a long time.
¥ Pressing any button in sleep mode, wakes Blue-Bot up, plays a sound and flashes the
eyes.

Related product manuals