Selection
Validation
Selection
Validation
▼
▲
■ Select the lenght of the roadwork using the +
and - (select) user-defined keys.
■ Validate.
Traffic lenght programming
100m
200m
300m
…
2000m
Selection
Validation
STEP 3
Traffic light 1 time programming
■ Select the flashing time of the 1
st
light on the
1st traffic light using the + and - (select) user-
defined keys.
■ Validate.
▼
▲
5s
10s
15s
…
120s
Selection
Validation
STEP 4
Traffic light 2 time programming
■ Select the flashing time of the 2
nd
light on the
1st traffic light using the + and - (select) user-
defined keys.
■ Validate.
You must hear a double BEEP.
Validation
STEP 5
Validation of the cycle on traffic light 2
Starting mode
STEP 1
STEP 2
FEUX: 12,0V
FLASHING M
CYCLE:
FREE
FREE
LENGHT:100m
FREE
YELLOW 1: 45s
FREE
YELLOW 2: 20s
FREE 12,0V
100m 45s 20s m
FREE 12,0V
100m 45s 20s a
▼
▲
5s
10s
15s
…
120s
FREE PROGRAMMING
6
The passage time for each light is configurable.
The length of the site is adjustable up to 2000m.
■ Select « Free » mode with the + and -
(mode) user-defined keys.
■ Validate.
■ Switch on the remote control
■ Direct it to the window display symbol
■ Go to the 2nd traffic light
■ Direct the remote control to the window
display symbol
■ Validate.
You must hear a double BEEP.
Traffic light 1
Traffic light 2
To Next Page
Loading...